• CSF Race-Spec Engine Oil Cooler for BMW F3X & F2X (N55)
  • CSF Race-Spec Engine Oil Cooler for BMW F3X & F2X (N55)
  • CSF Race-Spec Engine Oil Cooler for BMW F3X & F2X (N55)
  • CSF Race-Spec Engine Oil Cooler for BMW F3X & F2X (N55)

CSF Race-Spec Engine Oil Cooler for BMW F3X & F2X (N55)

$399.00
UPC:
710353081457
Adding to cart… The item has been added

Verify fitment with your vehicle


WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Track-driven BMWs powered by the N55 engine often struggle with rising oil temperatures that trigger limp mode and cut sessions short. The CSF 8145 replaces the factory oil cooler with a high-performance race-spec unit designed to maintain manageable temperatures during extreme driving. This upgrade utilizes a dual-core in-series system to provide an approximate 40% increase in heat rejection over the stock component.

Key Features

  • Innovative 2-core in-series system for maximum cooling capacity
  • Secondary backside cooler adds 5 rows of cooling for 40% more heat rejection
  • Uses 26mm multi-channel micro-tubes for high-pressure durability
  • High-density multi-louvered fin design maximizes surface area contact
  • Single-pass design with high-pressure return line for optimal flow
  • True drop-in fit requires no modifications to factory brackets or ducting
  • Accepts all OEM oil-line connections and mounting hardware
  • Track tested on Hittman Racing M235iR endurance race cars
  • Finished in durable black paint

Specifications

Core MaterialAluminum
Core TypeTube-and-Fin
Core Thickness26mm
Core Row Quantity2
Inlet/Outlet TypeOE Type Connection
FinishBlack Paint
GradePerformance

Fits

Fits BMW F3X and F2X chassis vehicles equipped with the N55 engine. This includes the M235i, 335i, and 435i models. Verify your specific chassis and engine configuration before ordering.

Installation

This unit is a drop-in fit application that installs in the OEM location with no modifications necessary. It is designed to work with all factory oil lines, mounting brackets, and shrouds. Note that this cooler has a larger internal volume than the factory unit and requires an additional 0.5 quarts of oil for a proper fill-up (7.5 quarts total). CSF recommends installation by a qualified facility if you are not familiar with BMW oil system service.

PDP tag:
Free Shipping*

Reviews