WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.Got a G series M car? You're in luck! To accompany our evergrowing line-up of suspension and handling products for G8x models, we've engineered new Adjustable Drop Links which are an essential upgrade to any lowered or hard-driven M-car.
The MMR Performance Adjustable Drop Links (Sway Bar End Links) for BMW G8x M2 / M3 / M4 are an essential upgrade. Add precision by replacing rubber joints with motorsport-spec ball joints, plus the adjustability allows the preload on your anti-roll bar to be corrected if you’ve changed from factory ride height.
The MMR Performance Adjustable Drop Links are a great choice for any lowered or hard-driven M-car to zero the pre-load on your anti-roll bar geometry. Plus by replacing the stock rubber joints with motorsport-spec ball joint ends, you'll add valuable stiffness and precision to handing/steering dynamics.
The drop link attaches the front anti roll bar ends to the front damper. The OEM links were made the length they are for a reason - to compliment the standard ride height.
So when ride-height is changed the car will now be pulling your anti-roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. With around 40mm of adjustable length, plus left / right threaded ends for easy length adjustment, the MMR Adjustable Drop Links will allow you to adjust back to zero preload on the Anti Roll Bar, allowing it to operate exactly as it should again.
Motorsport-specification ball joint ends using high strength teflon-lined steel mean much more direct response when turning in to corners. By replacing the soft rubber bushing in the factory links with these motorsport-spec ball joints, cornering and steering responses are immediately sharpened. Importantly, rubber dust boots are fitted to protect the joints from road dirt and salt accumulation.
The lightweight CNC-machined 6061-T2 Aluminium bodies themselves are finished with beautiful gloss Dark Anthracite anodised coating to look good, and stay looking good.
Features
-
Made from T6061 Aluminium
-
Anodised in signature MMR Gloss black
-
Heavy-duty ball joints to ensure a long life span
-
290-330mm total length adjustment range
