Need to keep an eye on your Air/Fuel Ratio!
The Innovate Motorsports LC-2 wideband kit comes with everything you need to read AFR right on your Multi-Gauge. This is the easiest way to keep an eye on your AFR without adding clutter to your interior. The LC-2 utilizes 100% digital wideband air/fuel ratio technology. With it's patented award-winning DirectDigital™ signal processing technology, the LC-2 can show exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges.
KEY FEATURES
- Can be tied directly into P3 Multi-Gauge using analog input
- Patented DirectDigital™ Wideband Technology
- Wideband O² Compatible with ALL fuel types
- Ability to calibrate O² sensor for maximum accuracy
- Integrated dual-color status LED (Green/Red)
- *2-Configurable linear 0-5v analog outputs
- 8ft sensor cable
- Positive lock connectors for all connections
- Innovate MTS serial in/out
- Serial connection to your PC
- Real-time display data on screen and/or with powerful LogWorks software
*Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs.
DEFAULT OUTPUT CONFIGURATION
Analog Output 1- (Yellow wire) 0 volt = 7.35 AFR 5 volts = 22.39 AFR
Analog Output 2- (Brown wire) 1.1 volt = 14 AFR .1 volt = 15 AFR
With the provided LM Programmer software these analog outputs may also be configured by the user.
SPECIFICATIONS
Power | |
Operating Voltage | 9.8V to 16V DC |
Input Current, O² heater initial warm-up | 2.0A nominal, 3A max |
Input Current, O² normal operation | 0.8A nominal, 1.1A max |
Environmental | |
Operating ambient temperature | 0° to 140° F (−17.78° to 60° C) |
Storage ambient temperature | −40° to 185° F (−40° to 85° C) |
Water resistance | Splash resistant, non-submersible |
Sensors | |
Compatible Types | Bosch™ LSU4.2 & Bosch™ LSU4.9 |
Bosch™ Heater Control | Digital PID via pump-cell impedance |
Measurements | |
Lambda | .5 to 8.0 |
Air/Fuel Ratio | 7.35 to 117 (gasoline), Fuel Type Programmable |
Accuracy | |
For Lambda | Accurate to +/- .007 (.1 AFR) |
Response Time | |
Free Air to Lambda | < 100 mS ( < 25 mS typical) |
Inputs | |
Serial | 1- Innovate MTS Compatible |
Outputs | |
Analog | 2- 0-5VDC, 10 bit resolution, programmable |
Serial | 1- Innovate MTS Compatible |
Communication | |
Serial | MTS (Innovate Modular Tuning System) compatible |
Electrical/Electronic parts are non-returnable.
- productDeskExternalKey:
- LBBE|P3LC2WB