WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.Need to keep an eye on your Air/Fuel Ratio!
The Innovate Motorsports LC-2 wideband kit comes with everything you need to read AFR right on your Multi-Gauge. This is the easiest way to keep an eye on your AFR without adding clutter to your interior. The LC-2 utilizes 100% digital wideband air/fuel ratio technology. With it's patented award-winning DirectDigital™ signal processing technology, the LC-2 can show exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges.
KEY FEATURES
- Can be tied directly into P3 Multi-Gauge using analog input
- Patented DirectDigital™ Wideband Technology
- Wideband O² Compatible with ALL fuel types
- Ability to calibrate O² sensor for maximum accuracy
- Integrated dual-color status LED (Green/Red)
- *2-Configurable linear 0-5v analog outputs
- 8ft sensor cable
- Positive lock connectors for all connections
- Innovate MTS serial in/out
- Serial connection to your PC
- Real-time display data on screen and/or with powerful LogWorks software
*Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs.
DEFAULT OUTPUT CONFIGURATION
Analog Output 1- (Yellow wire) 0 volt = 7.35 AFR 5 volts = 22.39 AFR
Analog Output 2- (Brown wire) 1.1 volt = 14 AFR .1 volt = 15 AFR
With the provided LM Programmer software these analog outputs may also be configured by the user.
SPECIFICATIONS
| Power | |
| Operating Voltage | 9.8V to 16V DC |
| Input Current, O² heater initial warm-up | 2.0A nominal, 3A max |
| Input Current, O² normal operation | 0.8A nominal, 1.1A max |
| Environmental | |
| Operating ambient temperature | 0° to 140° F (−17.78° to 60° C) |
| Storage ambient temperature | −40° to 185° F (−40° to 85° C) |
| Water resistance | Splash resistant, non-submersible |
| Sensors | |
| Compatible Types | Bosch™ LSU4.2 & Bosch™ LSU4.9 |
| Bosch™ Heater Control | Digital PID via pump-cell impedance |
| Measurements | |
| Lambda | .5 to 8.0 |
| Air/Fuel Ratio | 7.35 to 117 (gasoline), Fuel Type Programmable |
| Accuracy | |
| For Lambda | Accurate to +/- .007 (.1 AFR) |
| Response Time | |
| Free Air to Lambda | < 100 mS ( < 25 mS typical) |
| Inputs | |
| Serial | 1- Innovate MTS Compatible |
| Outputs | |
| Analog | 2- 0-5VDC, 10 bit resolution, programmable |
| Serial | 1- Innovate MTS Compatible |
| Communication | |
| Serial | MTS (Innovate Modular Tuning System) compatible |
Electrical/Electronic parts are non-returnable.
- productDeskExternalKey:
- LBBE|P3LC2WB
