WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.Choose Between The Following SKU's Above: JHM-3LV6LWFWCC-aluminum-S1OrgOrg, JHM-3LV6LWFWCC-aluminum-S3CerMet.
JHM has been testing and abusing the B7 RS4 pressure plate since early 2009. This started with our B6-B7 S4 and B7 RS4 product development which included record setting all motor, nitrous, and supercharger runs. All of these results compliment the records we've set with our flagship car, the 2001.5 Nogaro Blue B5-S4. To this day we still own, daily drive, and test products on all of our in house cars, including our B6-A4 3.0 V6. This car has been running our new Lightweight Flywheel and Clutch setup with the B7-RS4 pressure plate for quite some time and has already set some records of its own (new videos soon to be released). We have seen much better results with this new kit than we had with the older B5-RS4 pressure plate setups we used to sell.
In true JHM style here are some videos of some of the abuse we have put this clutch setup through during our R&D process:
NEW VIDEO AS OF December 2011!!! 10.8 quarter mile pass with our 2001.5 B5 S4, full weight street car with stock hood and full exhaust. This car has the Stage 4 clutch disc and can hold some power.
JHM burnouts and abuse from late 2010 with our B7 RS4 (we have since gone faster all motor). VIDEO -->HERE>
JHM Record Setting Track Run: 11.96 @ 116mph with our Stage 1 B6 S4 Vortech Supercharger Kit on a stock motor. VIDEO -->HERE>
Yes, these are videos of our in house 2001.5 B5-S4, 2005 B6-S4, and our B7 RS4, not a B6-A4 3.0. These videos better demonstrate the performance of this new clutch kit due to the fact that these cars have way more torque than the B6-A4 3L V6. The V8 cars produce torque instantly which is the ultimate test of the clamp load of a pressure plate. Pressure plate manufacturers use torque - not horsepower - to measure how much power a clutch kit can hold. Torque - not horsepower - is a measurable value. Horsepower is created through torque and revolutions per minute of the motor using a mathematical calculation, not by measuring the force of the motor directly. Therefore torque - not horsepower - is critical when measuring the performance of a clutch and pressure plate.
We looked at these results from our V8 cars and the B5-S4 and thought that we had to get this setup on our latest in house car, the B6-A4 3.0. We wanted to offer our in-house car (and eventually our customers) the extra durability, street-ability, and lower cost of the B7-RS4 pressure plate. Unfortunately, the B7-RS4 pressure plate IS NOT a bolt on part for the B5-S4. With our custom made lightweight flywheel, now it is.
This flywheel is not like others out there. It is not just a cheaply made, mass produced, or modified flywheel but a high quality part, made here in California. It's designed specifically to accept the B7-RS4 pressure plate. This pressure plate coupled with our proprietary LWFW design, offers an increased clamp load over previous setups. (We had it independently tested and we found that it has 18% more clamp load than the B5-RS4 pressure plate). It also gives you a lighter and more precise pedal feel leading to all around better drivability in your B6-A4 3.0.
We have plenty of experience with older style clutch an flywheel setups having already gone 11.1 @ 130mph back in 2007 with a stage 3 S4 using a B5-RS4 pressure plate along with a Stage 3 style clutch disc. We know our new kit is much better than our previous offerings that we had on the car (see above video). This pressure plate and flywheel setup has 18% more clamp load!!! That allows it to hold more torque than the old style, B5 RS4 pressure plate setups while still maintaining a lighter, more precise pedal!
SPECIFICATIONS
- ALUMINUM FLYWHEEL USA MADE - These JHM lightweight flywheels are made out of aluminum and weigh 50% less than a stock flywheel: 14lbs versus 28lbs on a stock B6-A4 3.0!!! The iron friction liner is replaceable, so you will never have to buy a new flywheel again. Simply swap the liner if you ever replace your clutch. The crank position ring is welded to the ring gear and fastened with countersunk screws (not cheap pins which are prone to shearing and can be found on other brands). An added benefit to this Lightweight Flywheel upgrade is that it allows B6-A4 owners to run the B7-RS4 pressure plate featured in our JHM clutch kits. This higher clamp load pressure plate is not compatible with the OEM B6-A4 flywheel, so you must run a JHM lightweight flywheel in order to use it.
Why a lightweight flywheel? When you reduce the weight of the rotating mass that the motor has to turn, you free up horsepower and make the engine more responsive.
- CLUTCH KIT - We currently offer our LWFW and Clutch Combo with a Fully Organic clutch disc at this incredibly low price. Testing on our in house B6-A4 3.0 with various performance upgrades has shown that this Organic disc coupled with the B7-RS4 Pressure Plate will provide more than enough holding power for a majority of 3.0 V6 setups. If you would like a different clutch disc for your custom setup, please call us or email us for more information.
INCLUDES THE FOLLOWING -JHM Aluminum Lightweight flywheel - New Pilot Bearing (already pressed in) - Flywheel to Crank Bolts and Thick Washers- OEM B7-RS4 Pressure Plate - Organic Clutch Disc - Pressure Plate to Flywheel Bolts - Throwout Bearing - Clutch Alignment Tool
INSTALLATION AND TORQUE NOTES HERE
NOTE: Clutch break-in is important and must be done properly. You need to do as much city type driving as you can for the first 500 miles the new clutch is in the car. Each time you start from a stop or shift it aids in the break in process. Highway mileage does not count. You also MUST avoid any racing activities, launching, or aggressive driving during the break-in period as this gets the clutch disc too hot. With that being said, you can go full throttle but you just can't speed shift or power shift.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
- PDP tag:
- Free Shipping*
