• Integrated Engineering Turbo Inlet Pipe for VW & Audi 2.0T/1.8T Gen 3 Engines | Fits VW MK7 & Audi 8V - IEINCI10
  • Integrated Engineering Turbo Inlet Pipe for VW & Audi 2.0T/1.8T Gen 3 Engines | Fits VW MK7 & Audi 8V - IEINCI10
  • Integrated Engineering Turbo Inlet Pipe for VW & Audi 2.0T/1.8T Gen 3 Engines | Fits VW MK7 & Audi 8V - IEINCI10
  • Integrated Engineering Turbo Inlet Pipe for VW & Audi 2.0T/1.8T Gen 3 Engines | Fits VW MK7 & Audi 8V - IEINCI10
  • Integrated Engineering Turbo Inlet Pipe for VW & Audi 2.0T/1.8T Gen 3 Engines | Fits VW MK7 & Audi 8V - IEINCI10

Integrated Engineering Turbo Inlet Pipe for MQB Vehicles

$119.99
Adding to cart… The item has been added
Order now and you should receive this item between Wednesday and Friday

Verify fitment with your vehicle


WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

TURBO INLET PIPE FEATURES

  • Greatly improves air-flow to the turbocharger
  • Constant high-flow inner diameter
  • CARB approved & 50 state emissions legal
  • Easy install, no modifications necessary
  • Long-life cast aluminum alloy
  • In-house CNC machined for perfect fitment
  • No leak o ring seal to the turbocharger 
  • Outflows stock inlet by 110CFM

IS YOUR STOCK INLET ROBBING POWER?

The factory-installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked-down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades. 

UPGRADE YOUR TURBO INLET PIPE

The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.

HORSEPOWER RESULTS

Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane

IE MQB Turbo Inlet Pipe Flow Chart

EASY INSTALLATION

Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation.

REQUIRES AFTERMARKET INTAKE

Due to the larger size of your new inlet pipe, this must be installed with an aftermarket cold air intake. This is a direct install along with an IE V2 MK7/8V MQB Intake Kit (PN IEINCI11). A "universal" silicone adapter is supplied that will allow it to be adapted to most 3-inch cold air intakes (direct fit is not guaranteed with non-IE brand intake kits).

VEHICLE FITMENT

  • Audi - A3 2015-2021 8V 1.8T & 2.0T engines
  • Audi - S3 2015-2021 8V 2.0T engine
  • Audi - TT 2016-2021 8S 2.0T engine
  • Audi - TTS 2016-2021 8S 2.0T engine
  • VW - Golf R 2015-2021 MK7 2.0T engine
  • VW - GTI 2015-2021 MK7 2.0T engine
  • VW - GLI 2019-2022 MK7 2.0T engine
  • VW - Golf/Alltrak 2015-2021 MK7 1.8T & 2.0T
  • VW - Atlas / Atlas Cross Sport 2020-2022 2.0T (EA888 Gen 3) engine

Note: Does not fit with the DV+ Diverter Valve or Diverter Valve spacers. 

CARB LEGAL

This turbo inlet pipe (and matching IE cold air intake system) is CARB certified and completely emissions compliant. Simply install your new IE Cast Turbo Inlet Pipe along with the included CARB EO sticker and worry-free pass emissions testing in all 50 states within the United States. Enjoy more power, sound, and fun on the track or road with the confidence of being 100% emissions legal.

This product is CARB certified under CARB EO Number D-838-1. More information can be found on CARBs website located HERE.

Reviews