WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.POWER FOR EVERY BUDGET, AND A SIMPLE UPGRADE PATH WHEN YOU’RE READY
The AWE S-FLO Intake Suite is available as the full kit with carbon cover, or piece-by-piece. Start with the S-FLO Filter, later upgrade to an S-FLO Intake (“filter on a stick”), then add the S-FLO Carbon Cover for the full experience. Or, go full S-FLO Carbon Intake from the jump. The decision is yours:
The S-FLO Carbon Intake:
For drivers looking for an intake that not only performs, but also looks going doing it, the AWE S-FLO Carbon Intake is the one. The S-FLO Carbon Intake is comprised of three primary components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube and (3) the 2x2 twill carbon fiber cover.
By deploying the fully enclosed S-FLO Carbon Intake, the ambient ram-air is drawn into the inlet and fed beneath the S-FLO’s carbon cover, keeping it cool compared to an open element configuration susceptible to engine bay temperatures. Keeping this ambient ram-air cool results in impressive power gains filtered through the AWE S-FLO Intake.
The AWE S-FLO Carbon Intake includes the S-FLO Carbon Cover, S-FLO Intake, S-FLO Filter, and all necessary brackets and mounting hardware.
The S-FLO Intake:
The AWE S-FLO Intake packs the same power as the full carbon intake, minus the carbon. The AWE S-FLO Intake is comprised of two key components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube. Together, it’s a free-flowing match made in heaven, allowing optimal flow geometry through the inlet, center section, and outlet of the tube, keeping things tight with our custom molded lip for a perfect seal to the airbox. The AWE S-FLO Intake includes the AWE S-FLO Intake hose, S-FLO Filter, and all required hardware for installation.
The S-FLO Filter:
The S-FLO Filter is the largest filter that can fit within the factory air-box, and also our bespoke filter of choice for all 3.0T / 3.2L S-FLO packages. The AWE S-FLO Filter is a proprietary, washable, dry media, large cylindrical filter that has been tested to allow up to 34% more airflow than the factory paper filter.
The AWE S-FLO Filter includes:
The entirety of the 3.0T/ 3.2L S-FLO lineup was designed and tested on AWE in-house vehicles, and are cost-effective, incredibly attractive upgrades to bring the power!
Please note: AWE S-FLO Intakes are for racing use only.
- PDP tag:
- Free Shipping*
