WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.Description
Monitor all the performance data on your MK8 GTI with a Unitronic P3 V3 OBD2 Gauge!
At the cutting-edge of technology, P3 Gauges offer users multitude readouts such as:
Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
Coolant temperature
Air/Fuel ratio (can be read in AFR or Lambda)
Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
Intake air temperature
Throttle angle
Ignition timing
Engine RPM
Exhaust gas temperature
Battery voltage
Programmable shift light
Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
Acceleration timers (0-60mph/0-100mph/60-130mph)
Braking timers (60-0mph/100-0mph)
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
P3 torture-tested its gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, their gauges function far beyond the limits of the in-car environment.
In addition, it comes engraved with the Unitronic logo if purchased here as part of our exclusive collection!
At the cutting-edge of technology, P3 Gauges offer users multitude readouts such as:
Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
Coolant temperature
Air/Fuel ratio (can be read in AFR or Lambda)
Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
Intake air temperature
Throttle angle
Ignition timing
Engine RPM
Exhaust gas temperature
Battery voltage
Programmable shift light
Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
Acceleration timers (0-60mph/0-100mph/60-130mph)
Braking timers (60-0mph/100-0mph)
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
P3 torture-tested its gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, their gauges function far beyond the limits of the in-car environment.
In addition, it comes engraved with the Unitronic logo if purchased here as part of our exclusive collection!
Features / Benefits
- Plug and Play Install
Plugs directly into your OBD2 port (Want to keep your OBD2 port open? Hard-wire harness kits are also available.) - OEM Integration
Installs above the factory light controls for a sleek look which doesn't obscure your view or obstruct critical controls - Versatility
Read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor. All readouts can be individually configured to read in either Imperial or Metric units. - Code Reading/Clearing
Read and clear diagnostic trouble codes (DTCs) on the fly - 1 year warranty from the manufacture
Related Hardware
- P3 Analog Boost Sensor via Unitronic
- P3 Ethanol Content Voltage Adapter via Unitronic
- Unitronic Ethanol Content Sensor w/ Harness
- PDP tag:
- Free Shipping*
