• MTS Technik Coilover Suspension Street For Volkswagen/Audi A4 Platform -  XMTSGWVW10

MTS Technik Coilover Suspension Street For Volkswagen/Audi A4 Platform - XMTSGWVW10

Was: $1,127.00
Now: $957.95
UPC:
05903855625013
Adding to cart… The item has been added

Verify fitment with your vehicle


WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.

MTS Technik Coilover Suspension - the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter - thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.

Product Attributes:

  • Camber / top mount FA: no
  • Camber / top mount RA: no
  • Coilover Helper Spring (Front): Spring rate (20 N/mm)
  • Coilover Main Spring (Front): Spring rate (60 N/mm)
  • Coilover Main Spring (Rear): Spring rate (28 - 55 N/mm)
  • Housing: Inox
  • Product notes: 3 - Front and rear axle height adjustable (threaded shock absorber housing on the front dampers springs and height adjustable elements on the rear). 5 - Stabilizer bars may need to be changed with longer ones if lowering more than 40mm. 6 - If the right drive shaft diameter of more than 42 mm the maximum lowering mentioned in the catalogue is reduced by 15 mm. 8 - Not for 4x4. 21 - If the vehicle is equipped with a stock sport suspension the lowering mentioned in this catalogue will be relatively lower. 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (02 inch). Otherwise use certificated wheel spacers. 73 - For easier height adjustment we recommend removing the rear adjustment changing the position of the spring plate and reinstalling the adjustment on the car.

Reviews