WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.
MTS Technik Coilover Suspension - the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.
Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter - thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.
Product Attributes:
- Additional information: Only for cars equipped with nivo. Ride height set with icnluded adjustable links.
- Camber / top mount FA: yes
- Camber / top mount RA: no
- Coilover Helper Spring (Front): Spring rate (20 N/mm)
- Coilover Main Spring (Front): Spring rate (70 N/mm)
- Housing: Gold
- Product notes: 8 - Not for 4x4. 12 - Only for vehicles without EDC. 21 - If the vehicle is equipped with a stock sport suspension the lowering mentioned in this catalogue will be relatively lower. 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (02 inch). Otherwise use certificated wheel spacers. 34 - Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735) 2x washer (BMW part: 31336776760) 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710) 2x supporting pot (BMW part: 33521090282) 2x washer (BMW part: 33521092986). 73 - For easier height adjustment we recommend removing the rear adjustment changing the position of the spring plate and reinstalling the adjustment on the car.
