WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.Upgrade your BMW F8x M2, M2 Competition, M3, or M4's braking performance with the MMX RP650 Fast Road Front Brake Pads. Engineered for enthusiasts who push their vehicles to the limits, these high-performance front pads are the perfect solution to minimize brake fade, delivering powerful and consistent stopping power across a wide range of temperatures.
Superior Stopping Power with ECE-90 Approved Materials
Crafted from a high-friction, ECE-90 certified aramid fiber compound, these RP650 pads are designed to withstand extreme heat, providing a friction coefficient of 0.42mu between 450°C and 650°C. This material ensures near-zero fade even under aggressive driving conditions, making it ideal for fast road applications and occasional track days while maintaining everyday driving comfort. The ECE-R90 certification also guarantees compliance with international standards for safety and performance, keeping your vehicle fully road-legal and insurance-friendly.
Optimized for High-Temperature Performance and Daily Use
Experience outstanding cold bite and fade resistance in high-temperature conditions. With progressive braking response and a focus on optimal pedal feel, the RP650 pads are built to give you confidence and control, whether you're navigating urban streets or taking on high-speed corners. The pads’ slotted and chamfered design minimizes noise, providing quiet and smooth operation for all driving scenarios.
Easy Plug-and-Play Installation with OEM Fit
Designed as a straightforward replacement for OEM front brake pads, the RP650 pads use standard braking hardware, allowing for seamless plug-and-play installation. Bedding in occurs naturally over the first 100-200 miles, making them easy to install and immediately effective.
Key Features
- High Performance for Fast Road & Track: Exceptional fade resistance and braking performance, even under high temperatures.
- ECE-R90 Certified: Fully compliant for road use, ensuring reliable safety and legality.
- Aramid Fiber Compound: High friction coefficient of 0.42mu in temperatures up to 650°C.
- Progressive Pedal Feel: Improved pedal response and consistent braking performance.
- Quiet, Smooth Operation: Slotted, chamfered construction minimizes noise.
- Bedding In: Natural bedding in over the first 100-200 miles.
- Plug-and-Play OEM Replacement: Compatible with existing hardware for easy installation.
- Available Matching Rear Pads and 2-Piece Discs: For optimal balance, consider upgrading the rear pads and discs.
Bedding in: After completing installation, make a series of 10 stops from 60mph (100kph) to 5-10mph (10-15kph). At the end of each stop, immediately accelerate back up to around 60mph (100kph) again for the next stop (the exact speed is not critical).
As you decrease to around 5-10 MPH (10-15kph), it is not necessary to watch the speedometer, keep your eyes on the road and approximate your speed at the end of each cycle. Do not come to a complete stop, as you will imprint pad material onto the disc, risking a vibration.
On the 8th or 9th stop, there should be a distinct smell from the brakes. Smoke may be evident after several stops as well. Also, by the 8th or 9th stop, some friction materials will experience “green fade”. This is a slight fading of the brakes. The fade will stabilise, but not completely go away until the brakes have cooled.
- PDP tag:
- Free Shipping*
