Stage 1 is designed for vehicles with stock hardware and will fully release all performance potential available from the stock turbochargers and engine. While no hardware upgrades are required, upgrading to a performance air intake system will net additional power gains of up to 40HP over stock!
4.0TT STAGE 2
Stage 2 is a full performance calibration to account for aftermarket downpipes looking for increased exhaust sound for track use. Due to the efficient 4.0L engine and stock turbo sizing, factory downpipes are not a restriction and upgrades do not increase power over Stage 1 with upgraded intake numbers.
REQUIRES DSG TUNE
All stages of IE calibrations for the C7 & C7.5 S6 & S7 require a matching DSG Tune for installation. Due to turbo sizing and engine characteristics, massive torque gains are seen through the low-mid range of the powerband. This exceeds the torque limitations of the factory DSG calibration and will cause slipping in the clutch packs. The factory shift maps are also not properly tuned for the new ECU powerband and causes a large performance loss without it. Instead of sandbagging power and reducing performance, your IE ECU tune is safely engineered to fully realize all available performance, but will require the additional purchase of the DSG transmission tune to reliably take advantage of the intense power.
E85 ETHANOL
E85 fuel unlocks the most performance potential from our ECU tunes for your Audi S6 or S7. Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides more horsepower and torque than running conventional gasoline and is more readily available (in most states) and less expensive than race gas. E85 is an optional fuel map included with all tune purchases. Although full E85 is recommended for the highest power output, safeguards are included within the E85 ECU calibrations to adjust for ethanol as low as E65. This flexibility gives you the confidence to safely fill up at the pump which can commonly test lower than advertised.
CYLINDER DEACTIVATION
The factory ECU calibration includes many compromises removed by your IE Tune. One of the most problematic is the stock cylinder deactivation which attempts to increase fuel economy by only running 4 cylinders when cruising. This causes rough shift, loss of power, and is believed to cause early failures of motor mounts. Cylinder deactivation is completely turned off by default. If you want to keep cylinder deactivation, we will reactivate on request.
LET YOUR V8 ROAR!
Your Audi S6 or S7 has a powerful twin-turbo V8, it's time to sounds like one too! To help accomplish this, your IE Tune includes two optional features on all stages that will make your eight cylinder turbo sound like the king of the streets. Add the motorsport-inspired Exhaust Crackle to your exhaust note or the iconic lopey idle with Ghost Cam. These addicting features exist purely to add more fun and excitement to your drive and can be turned on or off at will with your IE POWERlink.
RELIABILITY TESTING
IE's fully proven software brings track-ready ECU programming to your turbocharged V8 engine while retaining factory comfort and reliability. IE's own tuning technology suite is used to completely reverse-engineer the factory ECU mapping, allowing our software engineers access to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!
STAGE 1 HARDWARE GUIDE
PART UPGRADE | COMPATIBLE | REQUIREMENT |
DSG TUNE | | REQUIRED |
AIR INTAKE | | OPTIONAL |
INTERCOOLER | | OPTIONAL |
CATBACK EXHAUST | | OPTIONAL |
DOWNPIPES | X | Not Compatible With Stage 1 |
STAGE 2 HARDWARE GUIDE
PART UPGRADE | COMPATIBLE | REQUIREMENT |
DSG TUNE | | REQUIRED |
AIR INTAKE | | REQUIRED |
DOWNPIPES | | REQUIRED |
INTERCOOLER | | OPTIONAL |
CATBACK EXHAUST | | OPTIONAL |
CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.