WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.The Dinan Negative Camber Control Arms (D160-0006) are a critical suspension upgrade for various 2011-2019 BMW 5-Series and 6-Series models (F01/F02/F06/F10/F12/F13). This kit provides a remarkable reduction of understeer and more immediate turn-in by inducing more negative camber on the front wheels. This increase in front negative camber is accomplished in two ways: by installing a shorter front upper control arm to increase camber gain (the amount of negative camber created as the car rolls) and by increasing the static negative camber that you will see on your alignment readout.
The additional negative camber improves the grip of the front tires in the turns, reducing the vehicle's tendency to "plow" or "push" the front end for those who drive aggressively. This upgrade not only improves handling but also evens out tire wear during aggressive cornering, reducing the significant outside edge wear often noticed on performance vehicles.
Features:
-
Increased Negative Camber: Replaces the front upper control arms with shorter ones that increase negative camber by -0.5 degrees (both static and dynamic camber gain).
-
Handling Optimization: Induces more negative camber on the front wheels, improving the grip of the front tires and providing more immediate turn-in.
-
Reduced Understeer: The increased front grip dramatically reduces understeer and the vehicle's tendency to "plow" or "push" the front end.
-
Tire Longevity: Helps to even out tire wear during aggressive cornering by optimizing the tire contact patch.
Product Contains:
-
(2) Dinan Front Upper Control Arms (Increase negative camber by -0.5 degrees)
Warranty This product is supported by a Manufacturer's Warranty. Note: Manufacturer warranty terms are subject to change.
- PDP tag:
- Free Shipping*
- Sale:
- On Sale
- pdp tag:
- On Sale
