AWE Exhaust Suite for C7 Audi A6

Choose Between The Following SKU's Above: 3015-32048, 3015-33052.

The AWE A6 3.0T Touring Edition Exhaust is something special.

When the A6 and A7 came out, it would have been simple to re-purpose the A7 system for the A6. But after sound evaluations, we decided… it didn’t work.

So back to the drawing board we went to create a bespoke Audi A6 system that would produce acoustics perfect for the A6. This is a one-of-a-kind A6 system.

The Touring Edition Exhaust

The AWE Audi A6 Touring Edition Exhaust System comes in a dual outlet configuration, featuring 102mm slash cut tips on each side of the vehicle, designed to work with the factory rear valance. The tips are double walled to ensure a mirror finish even under hard usage. Each tip is individually adjustable, so stagger and depth into bumper can be set according to personal taste.

Perfect tone, compliments of AWE 180 Technology®.

As exhaust gases exit the 3.0T engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. More on AWE 180 Technology® in the tab above.

The Resonated Downpipes

The AWE Resonated Downpipes feature resonators larger than the stock units in order to produce a mellow sound volume. Our Resonated Downpipes feature larger than stock tubing diameter. Bonus.

Note: For those looking for the ultimate drone-free experience, we recommend pairing the Resonated Downpipes to the Touring Edition Exhaust.

What’s in the box?

The AWE A6 3.0T Touring Edition Exhaust includes two tips in the selected finish, all necessary hardware, under chassis brace spacers, aluminum collars, wrench, Accu-Seal, and T-Bolt clamps.