WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.The APR 980cc MPI Injector Kit (MS100195) is a critical fueling solution for high-horsepower 2.0T EA888.3 and 2.5 TFSI EVO engines. As enthusiasts push these platforms toward larger turbochargers and E85 (Ethanol) fuels, the factory fueling system often reaches its limits. This kit provides the necessary overhead by utilizing premium Bosch EV 14 injectors, which deliver a massive 980cc/min at 3 bar, ensuring consistent and safe fuel delivery even under extreme load.
The kit is designed for maximum reliability and ease of installation, featuring a plug-and-play wiring harness protected by high-quality braided sheathing. This harness converts the Bosch Jetronic connector to the factory-style 2-pin connector, eliminating the need for wire cutting or splicing. The injectors feature an extended tip nozzle and a 30° spray angle, specifically chosen to optimize atomization and combustion efficiency in modern VAG direct-injection cylinder heads.
Features:
- High-Flow Capacity: Flows 980cc/min (89lb/hr) at 3 bar, supporting high-output builds and Ethanol/Methanol fuels.
- Bosch EV 14 Technology: Utilizes the compact CKxT body with a 24mm extended tip for precise fuel placement.
- Plug-and-Play Harness: 150mm braided harness allows for a clean, factory-style installation with no soldering required.
- E85 & M100 Compatible: Fully resistant to the corrosive properties of high-ethanol blends and pure methanol.
- Motorsport Grade: Capable of supporting up to 8 bar of fuel pressure in aggressive racing configurations.
- Refined Spray Pattern: 30° single cone spray angle ensures optimal fuel-air mixing for better throttle response and power.
Product Contains:
- (1) Bosch EV 14 980cc MPI Injector
- (1) APR Braided Bosch-to-OEM Adapter Harness
Hardware & Software Requirements:
- ECU Software: Specific MPI-enabled ECU software is required to calibrate the engine for these larger injectors.
- EA888 Fitment: Plug-and-play only on models equipped with factory Multi-Port Injection (typically ROW models). North American (NAR) models without factory MPI require an additional MPI intake manifold, fuel rail, and wiring installation.
- Maintenance: If used with M100 (100% Methanol), the system must be flushed with gasoline after use to prevent internal damage.
Warranty: This product is supported by a Manufacturer's Warranty. Note: Manufacturer warranty terms are subject to change.
- Sale:
- On Sale
- pdp tag:
- On Sale
